Wiring A Lamp Switch. Unscrew the two outer screws, and then loosen the screws of the two internal. Web to learn proper wiring techniques, in the next few lessons we'll be making two mini practice lamp cord sets.
Wiring a light switch control each lamp by separately switch from www.electricaltechnology.org
Unscrew the two outer screws, and then loosen the screws of the two internal. This should create the perfect u shape (image 2). Web lift the plug as far as the internal wire will allow from the bottom.
Web Reassemble The Socket And Lamp.
Web each of this switch’s three buttons is programmable to trigger three different settings, making it possible to trigger multiple devices as well as scenes. Pull excess cord out of the bottom of the lamp. Disconnect the terminal and ground wires.
Then Loosen The Setscrew So You Can Unscrew The Socket Base.
Once done, free the terminal wires, using pliers if. (cover with a new piece of felt, if desired, to prevent lamp from scratching floor.) to wire. Web before starting, make sure everything is unplugged.
In This Diagram, Power Enters The Fixture.
Wrap your black wire clockwise around one of the. Web reattach the base and connect the plug. Web insert the wire into the hole and bend it around the lip of the pliers (image 1).
Pry The Socket Shell Out Of Its Base.
This should create the perfect u shape (image 2). Reassemble the socket shell around the socket. Tighten nut around pipe at base;
Web Lift The Plug As Far As The Internal Wire Will Allow From The Bottom.
To see the wire connections beneath, slide the metal container away from the base. Before ordering the items you. Cut the wires to remove the socket.
